The Shaving Cadre
Welcome to The Shaving Cadre, a forum dedicated to gentlemanly discourse about wet shaving and other topics of common interests. Membership is always free so register today and join in the fun
2025 Eucris Lathering Challenge
- Thread starter EMG06
- Start date
That's where my family heirloom cheese grater went.
18 April
Today I used some grated Eucris with distilled water. Wrung out brush.
Got a good amount of subpar pseudo lather. Adding additional water and it exploded with bubble-bath worthy foam. Still good and slick. Left the foam in the accumulator. We’ll see how much remains when it dries.
Today I used some grated Eucris with distilled water. Wrung out brush.
Got a good amount of subpar pseudo lather. Adding additional water and it exploded with bubble-bath worthy foam. Still good and slick. Left the foam in the accumulator. We’ll see how much remains when it dries.
18 Apr - Eucris test - Day 4
Puck Load, Palm lather. Synthetic brush
Today I soaked the puck for about a minute prior to loading. Loaded with a damp brush until I felt like it wasn't taking on any more soap. I palm lathered with paint brush strokes to try to get it to take the air out and thicken up. Paint brush application on the face , got slightly thicker, but still not anywhere near a creamy lather. Held up decent on the face, only slight dissipation from where it started. Second pass, again was very lacking and dissipated quickly.
Puck Load, Palm lather. Synthetic brush
Today I soaked the puck for about a minute prior to loading. Loaded with a damp brush until I felt like it wasn't taking on any more soap. I palm lathered with paint brush strokes to try to get it to take the air out and thicken up. Paint brush application on the face , got slightly thicker, but still not anywhere near a creamy lather. Held up decent on the face, only slight dissipation from where it started. Second pass, again was very lacking and dissipated quickly.
Used the Spider Williams method. Wet my face, rubbed the puck chunk on my face and with a few drops of water on my finger tips, hand lathered. Got fairly good lather.....but it also dissipated as I was shaving. Hand lathering on each quadrant of my face seems to give me enough time to shave before the lather evaporates. This is definitely not a high lather soap.
Another band name for your list.
EMG06
"TSC's Bingo Admiral"
Ok. Two days of shaving. No days of lather.
4/18:
Synthetic brush. Light bloom water on the puck, dry brush. Heavy load (60 seconds), dripped a few drops of water on the puck, then another 30 seconds of load. Then went to my face with only painting strokes. This led to a very thin covering of soap
Which was slick but barely looked like a lather at all
So made a few painting strokes while pressing the brush into my face to add just a little air. This created a little bulk, but not much of a result.
Lather was very airy/foamy despite my effort to introduce very little air. Oh well.
4/19:
Best badger brush. Wet the brush, squeezed the water out into the mug and let that sit for my shave. Then did a load until the soap looked ok on the brush. Went to my face to paint and got an ok result.
Will probably take a break for Easter tomorrow but I’ll be back at this next week.
4/18:
Synthetic brush. Light bloom water on the puck, dry brush. Heavy load (60 seconds), dripped a few drops of water on the puck, then another 30 seconds of load. Then went to my face with only painting strokes. This led to a very thin covering of soap
Which was slick but barely looked like a lather at allSo made a few painting strokes while pressing the brush into my face to add just a little air. This created a little bulk, but not much of a result.
Lather was very airy/foamy despite my effort to introduce very little air. Oh well.4/19:
Best badger brush. Wet the brush, squeezed the water out into the mug and let that sit for my shave. Then did a load until the soap looked ok on the brush. Went to my face to paint and got an ok result.
Will probably take a break for Easter tomorrow but I’ll be back at this next week.
19 April
The accumulator had a very different substance in it today. It was not like dried up foam. Rather, it was kind of a slurry with some lumps. I added some more grated soap to maximize the load. Using a synthetic brush and distilled water, I managed a rather thick lather like foam.
Shaving with my Vector was quite satisfactory. But despite the thickness of the foam, it still dissipated as before. I have used what I estimate to be 3 or 4 times the amount of product normally used for a bowl of lather. I think perhaps next try, I shall apply the slurry to my face and try to lather as with a cream.
The accumulator had a very different substance in it today. It was not like dried up foam. Rather, it was kind of a slurry with some lumps. I added some more grated soap to maximize the load. Using a synthetic brush and distilled water, I managed a rather thick lather like foam.
Shaving with my Vector was quite satisfactory. But despite the thickness of the foam, it still dissipated as before. I have used what I estimate to be 3 or 4 times the amount of product normally used for a bowl of lather. I think perhaps next try, I shall apply the slurry to my face and try to lather as with a cream.
EMG06
"TSC's Bingo Admiral"
EMG06
"TSC's Bingo Admiral"
Ok. Take 6
Maybe the fan shaped knot has been letting in too much air? So went with a synthetic bulb knot.
5 drops of water on the soap and loaded with a dry brush. Got a thick paste.
Started to paint on my damp face and kept getting nothing. Eventually got a thin layer of slick stuff (not a lather). More working eventually got to something a little better than the big bubbles which worked fine for a 3 pass shave. Not the best method, but maybe something here?
Maybe the fan shaped knot has been letting in too much air? So went with a synthetic bulb knot.
5 drops of water on the soap and loaded with a dry brush. Got a thick paste.
Started to paint on my damp face and kept getting nothing. Eventually got a thin layer of slick stuff (not a lather). More working eventually got to something a little better than the big bubbles which worked fine for a 3 pass shave. Not the best method, but maybe something here?
20 Apr - Eucris test - Day 5
21 Apr - Eucris test - Day 6
Bowl lather. Boar brush
Yesterday was a bit of a rushed shave with a boar brush. Aside form switching the brush I didn't do too much to try to improve the lather. Today, I soaked the soap for a few minutes, loaded a bunch, then attempted to bowl lather. I tried to bowl lather slowly to puch air out, but it didn't work like palm lathering does. No matter what I did, I was just adding more air. Then I tried to add water, and that didn't help things either.
Overall I'm finding that no matter what I do, the resulting lather is similar and the shaves are about the same,
21 Apr - Eucris test - Day 6
Bowl lather. Boar brush
Yesterday was a bit of a rushed shave with a boar brush. Aside form switching the brush I didn't do too much to try to improve the lather. Today, I soaked the soap for a few minutes, loaded a bunch, then attempted to bowl lather. I tried to bowl lather slowly to puch air out, but it didn't work like palm lathering does. No matter what I did, I was just adding more air. Then I tried to add water, and that didn't help things either.
Overall I'm finding that no matter what I do, the resulting lather is similar and the shaves are about the same,